High Suction Regenerative Pumpsets
SINGLA High Suction Regenerative Pump sets are made using the most modern machinery and superior quality raw material thus ensuring high performance and longer product life. LTB-2 (brass) impellers are used to give trouble free service. Pump volute chambers and impellers are designed to give best hydraulic efficiency. Sealing in these pump sets are done by a means of mechanical seal made of carbon and ceramic. Double shielded pre lubricated ball bearings are fitted at both end to withstand axial and radial loads. These pump sets are powered by totally enclosed fan cooled two pole motors with stators made up of low watt loss lamination and dynamically balanced rotors for higher efficiency. These pumpsets are wound with high grade enameled copper wire and are fitted with thermal overload protector.
APPLICATIONS:
SALIENT FEATURES:
SPECIFICATIONS
Power Range | 0.5 to1HP |
Version | 180-240V 1Ph 50 Hz |
Speed | 1440/2880rpm |
Flow Rate | 10-58 lpm |
Head Range | 8 - 51 meters |
Outlet size in inches | 1" |
Inlet size in inches | 1" |
Degree of Rotation | CCW, CW - 1Ph |
Type of duty | S1 (Continuous) |
MOC
PART NAME | MATERIAL |
Impeller | LTB-2 (brass) |
Delivery Casing, Adaptor | Cast Iron (FG-200) |
Motor Body | Cast Iron / Extruded Aluminium |
Shaft | Stainless Steel |
PUMPED LIQUIDS
Clean, thin, non-aggressive, non-explosive, clear, cold , Fresh water without abrasives.
![]() |
SINGLA MOTORS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |