9 Inch Borewell Submersible Pumpsets
SINGLA (9") Borewell Submersible Pump sets are made of hard wearing parts which makes the pump sets highly durable. Mixed flow submersible pump sets are fitted with stainless steel impellers (bronze impeller also available) and vital components like stage casing, suction are made of graded cast iron. Built in check valve prevents back flow and reduces the risk of water hammering. These pump sets are powered with (8") water filled rewindable submersible motors. Stators of these motors are made of low watt loss laminations which ensures higher efficiency. Dynamically balanced rotors and specially designed thrust bearings enables vibration and noise free operation with minimum wear and tear.
APPLICATIONS:
SALIENT FEATURES:
PUMPED LIQUIDS:
Clean, thin non-aggresive, nonexplosive, clear, cold, fresh water without abrasives.
SPECIFICATIONS
Power Range | 10 HP-60 HP |
Version | 350-415V, 50Hz in 3 Ph |
Speed | 2880 Rpm |
Flow Rate | 22-55 lps |
Total Head Range | 10-110 meters |
Outlet size in inches | 5" & 6" |
Degree of Protection | IP 58 |
Degree of Protection | CCW, CW in 3 Ph |
Maximum outer diameter | 210 mm |
Type of duty | S1 (Continuous) |
Thurst Load | 10 to 20 HP-3500 lbs, 25 to 60 HP- 10000 lbs |
MOC - MOTOR
PART NAME | MATERIAL |
Shaft Seal | Nitrile Rubber |
Stator Shell | Stainless steel |
Bushes | LTB4 / LTB5 |
Thrust Assembly | SS 420 and Graphite Carbon |
Upper Housing / Lower housing / Motor Base | Cast Iron |
Shaft | SS 410 / EN 9 |
MOC - PUMP
PART NAME | MATERIAL |
Impeller | Non Corrosive Stainless Steel |
Diffuser Chamber | Cast Iron {FG 200} |
Sleeve / Bush | SS 410 with Chrome Plated / NBR |
Suction Housing | Cast Iron |
Pump Shaft | SS 410 |
Coupling | SS 410 |
NRV Housing | Cast Iron {FG 200} |
Pump Inlet Housing | SS 202 |
Cable Guard | SS 202 |
![]() |
SINGLA MOTORS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |