Switch on the Happiness
|
0.5 HP Turbo Flow (Cast Iron body)
Product Details:
- Control System Manual
- Head Size 30 m
- Discharge Pressure 2.5 kg/cm
- Flow Rate 2700 LPH
- Noise Level Low
- Mounting Type Base Mounted
- Inlet/Outlet 25 mm x 25 mm
- Click to View more
X
0.5 HP Turbo Flow (Cast Iron body) Price And Quantity
- 1 Unit
- Powder Coated
- IP44
- Class B
- 8.5 kg (Approx.)
- Single Phase
- 45°C
- Brass
- Air Cooled
0.5 HP Turbo Flow (Cast Iron body) Product Specifications
- Anti-corrosive, Durable, Compact Design
- Single Suction
- 8 m
- Mechanical Seal
- 25 mm
- 2880 RPM
- Centrifugal Pump
- 0.5 HP
- Domestic / Agriculture / Industrial
- 2700 LPH
- Base Mounted
- 25 mm x 25 mm
- 220V
- 0-45C
- Turbo Flow
- 50 Hz
- Low
- High
- Single Stage
- Electric
- 2.5 kg/cm
- 2700 LPH
- Self Priming
- Manual
- Cast Iron
- Water Transfer
- 30 m
- Powder Coated
- IP44
- Class B
- 8.5 kg (Approx.)
- Single Phase
- 45°C
- Brass
- Air Cooled
0.5 HP Turbo Flow (Cast Iron body) Trade Information
- Cash in Advance (CID), Cash Advance (CA)
- As Per Requirement Months
- Middle East, Africa, Asia
Product Description
Regenerative Self Priming Pumps(0.5 HP turbo Flow CI body)
SINGLA Regenerative Self Priming Pump sets are made using the state of the art machinery and quality raw material which results in high performance and long product life. Pump volute chambers and impellers are designed to give best hydraulic efficiency. These pump sets are powered by totally enclosed fan cooled two pole motors with stators of the motors are made up of low watt loss lamination and dynamically balanced rotors for higher efficiency. These pump sets are wound with high grade enameled copper wire and are fitted with thermal overload protector.
APPLICATIONS:
- Domestic water supply
- Minor Irrigation needs
- Sprinkler System
- Pressure boosting units
- Fountains
- Ponds and Gardens
SALIENT FEATURES:
- Light weight helps in easy installation.
- Brass impeller is used to give trouble free service.
- Pump casing, adaptor are made of close grained CI of high tensile strength.
- Fitted with thermal overload protector (TOP) which prevents motor burning.
- Motor windings are vacuum impregnated with synthetic varnish for better moisture resistance.
- High quality mechanical seal for effective sealing against water leakage.
- Extruded aluminum body is corrosion resistant and helps in better heat dissipation.
- Totally Enclosed Fan Cooled (TEFC) construction resists dust, moisture.
SPECIFICATIONS
| Power Range | 0.5 |
| Version | 180-240V 1Ph 50 Hz |
| Speed | 2880rpm |
| Flow Rate | Upto 48 lpm |
| Head Range | Upto 32 meters |
| Outlet size in inches | 1" |
| Inlet size in inches | 1" |
| Degree of Rotation | CCW, CW 1 Ph |
| Type of duty | S1 (Continuous) |
MOC
PART NAME MATERIAL Impeller HT Brass Delivery Casing Cast Ironn (FG-200) Adaptor Motor Body Cast Iron (FG-200) Shaft Seal Carbon-Graphite Pump Shaft SS410
PUMPED LIQUIDS
Clean, thin non-aggressive, non-explosive, clear, cold, fresh water without abrasives
Built for Performance and Durability
The 0.5 HP Turbo Flow pump stands out with its cast iron construction and brass impeller, ensuring both durability and efficient fluid movement. The anti-corrosive and powder-coated finish enhances longevity even when exposed to harsh conditions, making it ideal for continuous operation in varied environments.
Easy Installation and Maintenance
With its compact, base-mounted design, this pump allows for straightforward installation and servicing. Equipped with a manual control system and mechanical seal, users benefit from minimal maintenance interventions while ensuring reliable performance in both domestic and light industrial settings.
FAQs of 0.5 HP Turbo Flow (Cast Iron body):
Q: How do I install the 0.5 HP Turbo Flow pump for optimal performance?
A: To install the Turbo Flow pump, place it on a firm, level base near the water source. Ensure that the 25 mm inlet and outlet connections are securely fitted, and the pump is connected to a 220V single-phase power supply. Follow proper priming procedures due to its self-priming feature, and avoid operating it without water.Q: What applications is this centrifugal pump suitable for?
A: This pump is designed for a diverse range of uses, including domestic water supply, small-scale agricultural irrigation, and light industrial water transfer. Its high discharge pressure and self-priming capabilities make it effective for moving clean water where reliable flow and head are required.Q: When should maintenance be performed on the pump?
A: It is advisable to carry out routine maintenance every six months or sooner if the pump is used intensively. Regularly check for leaks, inspect the mechanical seal, clean the suction and discharge ports, and ensure that the motor is free of dust and debris. Always disconnect from power before servicing.Q: Where can this pump be installed for best results?
A: Install the pump in a well-ventilated, dry area close to your water source. The base-mount design allows for easy positioning on concrete floors or other sturdy platforms, and proximity to the source minimizes suction losses. Avoid locations prone to flooding or excess moisture.Q: What is the process to start the Turbo Flow pump after installation?
A: Once installed, fill the priming chamber with clean water, ensure all fittings are tight, and connect the pump to the power outlet. Switch on the power and observe the pump as it draws water. For safe operation, do not run the pump dry and monitor for unusual sounds or vibrations.Q: How can I use this pump safely for water transfer?
A: Always follow the installation and user manual instructions. Make sure the pump is primed before starting, only pump clean water (maximum 45C), and operate within the recommended voltage and frequency. Periodically inspect insulation and cooling to prevent overheating and ensure safe, long-term use.Q: What benefits does the pump offer compared to alternatives?
A: This pump provides several advantages, such as robust cast iron construction, a corrosion-resistant powder-coated finish, high-pressure performance, low operational noise, and a compact, easy-to-install design. Its self-priming feature and durability make it a cost-effective choice for consistent water transfer.Tell us about your requirement
Price:
Quantity
Select Unit
- 50
- 100
- 200
- 250
- 500
- 1000+
Additional detail
Mobile number
Email
Other Products in 'Regenerative Self Priming Pumpset' category
SINGLA MOTORS PVT. LTD.
GST : 06AAPCS1308D1ZM
GST : 06AAPCS1308D1ZM
-
Pingli Road, Near FCI Godown, Karnal - 132001, Haryana, India
-
Phone : 08045478917
- Name : Mr. Akhil Singla (Managing Partner)
- Mobile : 08045478917
 |
SINGLA MOTORS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |
