3 Inch Borewell Submersible Pumpset
SINGLA(3") Borewell Submersible Pumpsets are fitted with virgin quality glass filled noryl impeller.The optimal design of impellers and diffusers offer best efficiency. These pumpsets are powered by water filled/ oil filled rewindable submersible motors of continuous duty. The stator is made up of low watt loss silicon lamination and is wound with high grade copper wire (poly wire in case of water filled motor and enameled wire in oil filled motor) which ensures higher efficiency.
APPLICATIONS:
SALIENT FEATURES:
PUMPED LIQUIDS:
Clean, thin non- aggressive , non-explosive, clear, cold, fresh water without abrasives.
SPECIFICATIONS
Power Range | 0.75 HP-1.5 HP in water filled, 0.75 HP - 1 HP in oil filled |
Version | 180-240V 1Ph, 50Hz in water filled, 140-240V 1Ph, 50Hz in oil filled |
Speed | 2880rpm |
Flow Rate | 0.2-1.25 lps |
Total Head Range | 10-70 meters |
Outlet size in inches | 1" & 1¼" |
Degree of Protection | IP 58 |
Direction of Rotation | CCW -1 Ph |
Maximum outer diameter | 76mm |
Type of duty | S1 (Continuous) |
Maximum cooling flow | 0.15m /sec |
Maximum starts per hour | 12 times |
MOC-MOTOR
PART NAME | MATERIAL (WATER FILLED) | MATERIAL (OIL FILLED) |
Shaft Seal | Nitrile Rubber | Mechanical, Nitrile Rubber |
Stator Shell | Stainless Steel | Stainless Steel |
Thrust Pad/Bearing | Graphite Carbon | Pre Lubricated Ball Bearing |
Thrust base | SS 420 | - |
Motor Base/Lower Housing/Upper Housing | Cast Iron | Cast Iron |
Shaft | SS 420 | SS 420 |
MOC-PUMP
PART NAME | MATERIAL(OIL/WATER FILLED) |
Impeller | Polycarbonate |
Diffuser | Polycarbonate |
Sleeve/Bush | SS 410 with Chrome plated / NBR |
Suction Housing | Cast Iron (FG-200) |
Pump Shaft | SS 410 |
Coupling | SS 410 |
Pump Casting | Stainless Steel |
NRV Housing | Cast Iron (FG - 200) |
NRV | ABS |
NRV Seat | NBR |
SINGLA MOTORS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |