4 Inch Submersible PumpSets (SS)
SINGLA [4"] Borewell Submersible Pump sets are made of hard wearing parts which makes the pump sets highly durable. All high head pump sets are fitted with non return valve which prevents back flow and reduces the risk of water hammering. Impellers and diffusers are made up of SS 304 grade which ensures long life in sandy bores. These pump sets are powered by water filled/oil filled rewindable submersible motors of continuous duty. The stator is made up of low watt loss silicon lamination and is wound with high grade copper wire [poly wire in case of water filled motor and enameled wire in oil filled motor] which ensures higher efficiency.
APPLICATIONS:
SALIENT FEATURES:
PUMPED LIQUIDS:
Clean, thin non-aggresive, nonexplosive, clear, cold, fresh water without abrasives.
SPECIFICATIONS
Power Range | 0.5 HP-5.0 HP in 1Ph, 2.0 H.P-7.5 H.P in 3Ph |
Version | 180-240V 1Ph 50Hz, 350-415V 3Ph 50Hz |
Speed | 2880rpm |
Flow Rate | 0.3-6.5 lps |
Total Head Range | 10-300 meters |
Outlet size in inches | 1" , 1" , 1" , 2" & 2" |
Degree of Protection | IP 58 |
Degree of Protection | CCW |
Maximum outer diameter | 94mm |
Type of duty | S1 (Continuous) |
Maximum cooling flow | 0.15 m/sec |
Maximum starts per hour | 12 times |
MOC-MOTOR
PART NAME | MATERIAL (WATER FILLED) | MATERIAL (OIL FILLED) |
Shaft Seal | High Nitrile/Ceramic/Tungsten Carbide | High Nitrile/Ceramic/Tungsten Carbide |
Stator Shell | SS 202 | SS 202 |
Thrust Pad/ Bearing | Pre lubricated Ball Bearing | Carbon |
Thrust Base | ------- | SS 304 |
Motor Base/Upper Housing/Lower Housing | SS 304 | SS 304 |
Shaft | SS 431 | SS 431 |
MOC-PUMP
PART NAME | MATERIAL |
Impeller | SS 304 |
Diffuser | SS 304 |
Sleeve/Bush | SS 410 with Chrome plated / NBR |
Suction Housing | SS 304 |
Pump Shaft | SS 410 |
Coupling | SS 410 |
Pump Casing | Stainless Steel |
NRV Housing | SS 304 |
NRV | ABS |
NRV Seat | NBR |
![]() |
SINGLA MOTORS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |