4 Inch Water Filled Submersible PumpSet
SINGLA [4"] Borewell Submersible Pump sets are made of hard wearing parts which makes the pump sets highly durable. All high head pump sets are fitted with non return valve which prevents back flow and reduces the risk of water hammering. The optimal design of impellers and diffusers offer best efficiency. These pump sets are powered by water filled rewindable submersible motors of continuous duty. The stator is made up of low watt loss silicon lamination and is wound with high grade copper poly wire which ensures higher efficiency.
APPLICATIONS:
SALIENT FEATURES:
PUMPED LIQUIDS:
Clean, thin non-aggressive, non-explosive, clear, cold, fresh water without abrasives.
SPECIFICATIONS
Power Range | 0.5 HP - 5 HP in 1Ph , 2 HP - 7.5 HP in 3Ph |
Version | 180-240V 1Ph 50Hz, 350-415V 3Ph 50Hz |
Speed | 2880 rpm |
Flow Rate | 0.3-6.5 lps |
Total Head Range | 10-300 meters |
Outlet size in inches | 1" , 1¼", 1½" , 2" & 2½" |
Degree of Protection | IP 58 |
Direction of Rotation | CCW - 1ph |
Maximum outer diameter | 94mm |
Type of duty | S1 (Continuous) |
Maximum cooling flow | 0.15m/sec |
Maximum starts per hour | 12 times |
MOC-MOTOR
PART NAME | MATERIAL |
Shaft Seal | Nitrile Rubber |
Stator Shell | Stainless Steel |
Thrust Pad / Bearing | Graphite Carbon |
Thrust Base | SS 420 |
Motor Base/Upper Housing/Lower Housing | Cast Iron |
Shaft | SS 420 |
MOC-PUMP
PART NAME | MATERIAL |
Impeller | Poly Carbonate |
Diffuser | Poly Carbonate |
Sleeve/Bush | SS 410 with Chrome plated / NBR |
Suction Housing | Cast Iron {FG-200} |
Pump Shaft | SS 410 |
Coupling | SS 410 |
Pump Casing | Stainless Steel |
NRV Housing | Cast Iron {FG-200} |
NRV | ABS |
NRV Seat | NBR |
SINGLA MOTORS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |