Water Cooled Centrifugal MonoBlock PumpSets
SINGLA Water Cooled Centrifugal Monoblock Pumpsets are made using the state of the art machinery and quality raw material thus ensuring long product life. This technology is indigenously developed at singla motors private limited. Pump casing and impellers are designed to give better hydraulic efficiency. These pumpsets are powered by water cooled four pole motors . Since the medium of cooling is water , the motor performs better in low voltage conditions as compared to air cooled models. Stators of these motors are made up of low watt loss lamination with dynamically balanced rotors for higher efficiency. These pumpsets are wound with high grade enameled copper wire which ensures good performance over a wide voltage band.
APPLICATIONS
SALIENT FEATURES
Specifications
Power Range | 3HP to 15HP |
Version | 350-415V 3Ph 50Hz |
Speed | 1440 rpm (slow speed) |
Flow Rate | Upto 3800 LPM |
Head Range | Upto 25 meters |
Suction Lift | Upto 7 mtrs |
Outlet size in inches | 3", 4" , 5" & 6" |
Inlet size in inches | 3", 4" , 5" & 6 " |
Direction of Rotation | CCW, CW-1 Ph |
Type of duty | S1 (Continuous) |
Connection | 3HP to7.5HP DOL , 10HP to 15HP SD |
Degree of Protection | Ip44 |
Insulation Class | A/B/F |
MOC
PART NAME | MATERIAL |
Motor Body | M.S Sheet |
Delivery Casing, Adaptor | Cast Iron (FG-200) |
Impeller | Cast Iron (FG-200) |
Mechanical Seal/Gland Packing | Carbon-Graphite/ Stuffing box with threaded graphite cotton |
Shaft | EN 8 |
PUMPED LIQUIDS
Clean, thin non-aggressive, non-explosive, clear, cold, fresh water without abrasives.
SINGLA MOTORS PVT. LTD.
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |